Showing posts with label tractor. Show all posts
Showing posts with label tractor. Show all posts
Wednesday, January 21, 2015
Friday, September 12, 2014
Lawn Care and Log Splitting Help
| Scott cutting notch |
| Alex chiseling a notch |
| Alex hopping off the MF 240 after testing the new front tires |
Friday, July 11, 2014
44th Annual Old Southeast Threshers Reunion
Special report..Scott and I attended the Southeast Old Threshers Reunion in Denton, NC on July 5. http://www.farmpark.com/
We thoroughly enjoyed getting educated about the steam engine and its significance in revolutionizing agriculture in America. Live demonstrations of fully functioning steam driven tractors were going on at regular intervals for fair goers to see. Some of the tractors dated back to the early 1900's or earlier. They have a steam locomotive that lumbers around the park carrying kids and enthusiasts alike.
The above photo showing the tractor that powered the wheat thresher. We got some footage of this actually working but the video needs some editing before posting. Stay tuned for this later.
Of course our interest was on the modern too and anyone with even a passing fancy for restored and shiny old tractors would not have been disappointed. Farmall was the focal brand this year and there were lots of them to see at this fair. I am especially fond of the Farmall Cub because of its small stature and sturdiness. Someday maybe I will get one? A lo boy version perhaps for the hilly terrain we have...?
We thoroughly enjoyed getting educated about the steam engine and its significance in revolutionizing agriculture in America. Live demonstrations of fully functioning steam driven tractors were going on at regular intervals for fair goers to see. Some of the tractors dated back to the early 1900's or earlier. They have a steam locomotive that lumbers around the park carrying kids and enthusiasts alike.
| Thresher power plant made by Frick, Racine, WI. |
Of course our interest was on the modern too and anyone with even a passing fancy for restored and shiny old tractors would not have been disappointed. Farmall was the focal brand this year and there were lots of them to see at this fair. I am especially fond of the Farmall Cub because of its small stature and sturdiness. Someday maybe I will get one? A lo boy version perhaps for the hilly terrain we have...?
| Farmall Cub (1950) painted white signifying that it was a demonstration model. Supposedly they were to be repainted the typical red color as shown below if sold to a customer. |
| Your Blogger talking to Gary Pickeral of International Harvester about his antique Farmall Cub pictured. |
| Antique Farmall Cub Lo Boy, circa 1950 Farmall Super A-1 for show only above the Massey. Not many Massey Ferguson tractors were on display. This antique Ford 8N being raffled off for charity |
Labels:
cub,
dealer,
denton,
farmall,
farmall red,
farmall white,
ferguson,
john deere,
john deere green,
lo boy,
massey,
massey red,
mf,
paint,
steam engine,
threshers reunion,
tractor,
white paint
Sunday, June 22, 2014
Does Massey Ferguson and Ford Go Together?
We shall see! Scott bought a Ford Series 710, Model 19-205 Rear Adjustable Blade for mounting to the 3-point hitch of the tractor (which are universal systems). It would appear the implement was made circa 1960. It was very rusty but for the most part in good shape other than the fact the we cannot yet unfreeze (rusty?) the thing to adjust the blade angle from perpendicular to direction of tractor travel. We'll try using it to see if we can free it up. Scott wire brushed as much of the rust away as he could then primed and painted with "Ford Blue" color. It is a hefty piece of equipment and we figure the whole thing weighs about 350 pounds. The guy who sold it to us had to lift it into our little trailer with a crane attachment he had on his tractor. Scott had to remove the scraper blade then carefully ease it down and out of the trailer from the side.
Here is a before new paint:
After :
The moldboard (scraper blade) is also painted and ready to be re-attached to the frame assembly and then transported up to Pelham for hooking to the tractor for some road and ditch work. Here is pic of the original Ford tag with serial number.
Here is a before new paint:
The moldboard (scraper blade) is also painted and ready to be re-attached to the frame assembly and then transported up to Pelham for hooking to the tractor for some road and ditch work. Here is pic of the original Ford tag with serial number.
Monday, June 2, 2014
MF 240 to the Shop
May 31 was another interesting day where we loaded up the tractor for being transported to the local shop in Reidsville for repair. The tractor had to be winched up onto the flatbed.
Subscribe to:
Posts (Atom)
