Plow being unloaded from the trailer:
Showing posts with label Ford. Show all posts
Showing posts with label Ford. Show all posts
Monday, January 26, 2015
2-Bottom Plow for Swale Making
We've been looking for a used one or two bottom plow now for awhile so we can build swales on contour for slowing water down on slopes. Of course the plow can and will likely be used for making a good sized garden too. A local fellow in Reidsville, NC posted a nice old used 16" Ford 101-61 bottom plow on Craigslist and worked out a good deal. He restored the original look fairly well with a fresh coat of paint. The plow shares were in good shape but it was missing the coulters. Not sure if this is critical for us yet but we can always buy a pair later if we find we will need them.
Plow being unloaded from the trailer:
Plow being unloaded from the trailer:
Sunday, June 22, 2014
Does Massey Ferguson and Ford Go Together?
We shall see! Scott bought a Ford Series 710, Model 19-205 Rear Adjustable Blade for mounting to the 3-point hitch of the tractor (which are universal systems). It would appear the implement was made circa 1960. It was very rusty but for the most part in good shape other than the fact the we cannot yet unfreeze (rusty?) the thing to adjust the blade angle from perpendicular to direction of tractor travel. We'll try using it to see if we can free it up. Scott wire brushed as much of the rust away as he could then primed and painted with "Ford Blue" color. It is a hefty piece of equipment and we figure the whole thing weighs about 350 pounds. The guy who sold it to us had to lift it into our little trailer with a crane attachment he had on his tractor. Scott had to remove the scraper blade then carefully ease it down and out of the trailer from the side.
Here is a before new paint:
After :
The moldboard (scraper blade) is also painted and ready to be re-attached to the frame assembly and then transported up to Pelham for hooking to the tractor for some road and ditch work. Here is pic of the original Ford tag with serial number.
Here is a before new paint:
The moldboard (scraper blade) is also painted and ready to be re-attached to the frame assembly and then transported up to Pelham for hooking to the tractor for some road and ditch work. Here is pic of the original Ford tag with serial number.
Subscribe to:
Posts (Atom)
